Sharp VL-Z500S User Manual

Appendix
96
Appendix
Darker Brighter
Decrease
Darker
Increase
Brighter
–
+
–
+
–
+
LCD BRI GHT
LCD COLOUR
VF BRIGHT
5 Press the MENU button to turn off the
menu screen.
Note:
• When adjusting the colour, the picture on the
LCD monitor may differ from the picture
actually recorded. Do not change the colour
setting unless necessary. (This adjustment
only affects the monitor picture, not the
recorded image.)
Appendix
Picture/Backlight
Adjustments
Available modes:
All modes
If the picture is difficult to see due to
ambient light or other factors, adjust the
monitor picture settings.
• The example screens shown are for Tape
Camera mode.
Adjusting the Picture
1 Press the MENU button to display the
menu screen.
2 Press l or m on the Operation
button to select O, then press the
centre of the Operation button.
3 Press l or m to select “LCD
BRIGHT”, “LCD COLOUR” or “VF
BRIGHT”, then press the centre of
the Operation button.
• The viewfinder turns on if you
select “VF BRIGHT”.
4 Press j or k to adjust the item to
the desired setting, then press the
centre of the Operation button.
LCD SET
BACKL I GHT
LCD BRI GHT
LCD COLOUR
RETURN
NORMAL
VF BRIGHT
–
+
–
+
–
+
Adjusting the Backlight
1 Press the MENU button to display the
menu screen.
2 Press l or m on the Operation
button to select O, then press the
centre of the Operation button.
3 Press l or m to select “BACK-
LIGHT”, then press the centre of the
Operation button.
4 Press l or m to select “NORMAL” or
“BRIGHT”, then press the centre of
the Operation button.
NORMAL: For use indoors or under
moderate lighting conditions.
BRIGHT: For use outdoors under
strong lighting conditions, such
as bright daylight.
5 Press the MENU button to turn off the
menu screen.
LCD SET
BACKL I GHT
LCD BRI GHT
LCD COLOUR
RETURN
VF BRIGHT
NORMAL
BRI GHT
BACKL I GHT
BRI GHT
VL-Z500S-GB-096-104 04.2.9, 3:25 PM96

Sharp VL-Z500S Specifications

General

Brand	Sharp
Model	VL-Z500S
Category	Camcorder
Language	English