Sharp VL-Z500S

43
Useful Features
Power Save Mode
Available modes:
All modes
Power save mode will turn off the
camcorder automatically to save battery
power when the camcorder is not in use for
5 or 10 minutes.
Note:
• To resume recording or playback, set the
Power switch to OFF, then back to v or w.
• The example screens shown are for Tape
Camera mode.
1 Turn on the camcorder, then press
the MENU button to display the menu
screen.
2 Press l or m on the Operation
button to select ~, then press the
center of the Operation button.
3 Press l or m to select “POWER
SAVE”, then press the center of the
Operation button.
4 Press l or m to select “5 MIN” or “10
MIN”, then press the center of the
Operation button.
5 Press the MENU button to turn off the
menu screen.
OTHERS 2
TIME
PO
W ER SAVE
CODE
TC
5 MI N
10 MIN
OU T
OFF
DAT E D I SP.
RETURN
SETT I NG
12H 24H/
PO W ER SAVE 5 MI N
To cancel the power save mode
Select “OFF” in step 4 above.
Notes:
• The camcorder will not turn off when
recording, playing back, AV or DV inputting or
connecting the USB cable.
• The camcorder will turn off prior to Power
Standby mode.
VL-Z500S-GB-038-048 04.2.9, 3:21 PM43