Sharp VL-Z500S User Manual

81
Digital Still Camera Features
Setting the File
Numbering Method
Available mode:
Card Camera
The camcorder automatically assigns file
numbers to captured images. You can
select two different methods of file number-
ing.
1 In Card Camera mode, press the
MENU button to display the menu
screen.
2 Press l or m on the Operation
button to select Y, then press the
centre of the Operation button.
3 Press l or m to select “FILE NO.”,
then press the centre of the Operation
button.
Types
SERIAL: Defines file numbers by
incrementing up from the last image
captured when inserting a new card.
RESET: Defines a new set of file
numbers when inserting a new card.
SETTING
SERIAL
REC MODE
RETURN
FILE
SELF TIMER
NO.
RESET
RESETFILE NO.
4 Press l or m to select “SERIAL” or
“RESET”, then press the centre of the
Operation button.
5 Press the MENU button to turn off the
menu screen.
Note:
• When a warning indicator “MAXIMUM FILE
NUMBER” appears on the screen, set FILE
NO. menu item to “RESET”, then format the
card (see page 80) or replace the card with a
new one (see page 11).
VL-Z500S-GB-076-081 04.2.9, 3:23 PM81

Sharp VL-Z500S Specifications

General

Brand	Sharp
Model	VL-Z500S
Category	Camcorder
Language	English