Sharp VL-Z500S

79
Digital Still Camera Features
Self-timer operating indicator
Self timer mode indicator
To cancel the countdown
Press the PHOTO button in step 4.
To cancel the self-timer
Press the centre of the Operation button
again in step 3.
Notes:
• When recording with the self-timer, stabilize
the camcorder in the horizontal plane by
attaching it to a tripod, etc.
• Self-timer mode cancels after recording one
image. Repeat steps 1 to 4 to record another
image with the self-timer.
• Do not turn the power off or remove the card
once the self-timer operating indicator begins
flashing.
Recording
1 Select the desired time lag.
2 Press the DISPLAY/MODE SET
button until the mode screen appears.
3 Press l or m on the Operation
button to select “SELF TIMER”, then
press the centre of the Operation
button.
• The self timer mode indicator, U
(10 SEC mode) or T (2 SEC
mode), appears.
4 Press the PHOTO button to start the
self-timer.
• The self-timer operating indicator
flashes while the timer counts down.
• The shutter automatically releases
after the time lag you selected, and a
still image of the subject is recorded.
81/9
NORMA L
AUTO
10
81/9
NORMA L
AUTO
CANCEL
10
EXECUTE
BLC/GAIN
SET M ANUAL
FOCUS
AUTO FOCUS
VL-Z500S-GB-076-081 04.2.9, 3:23 PM79