Preparation
6
Preparation
Preparation
Attaching and
Removing the Battery
Pack
Attaching
1 Make sure that the Power
switch is set to OFF.
2 Open the LCD monitor to a 90° angle
to the camcorder body.
3 Slide the battery pack in the direction
of the arrow with the “m” mark facing
out.
4 Push the battery pack in the direction
of the arrow until it clicks.
Power switch
“m” mark
90°
VL-Z950S-GB-006-021 04.2.3, 11:32 AM6
To Next Page
Loading...
