Sharp VL-Z950S

Preparation
14
Preparation
Selecting the Language
for the On-screen Display
Available modes:
All modes
This camcorder allows you to choose
English, German or French as the on-screen
display language.
Setting
When using the camcorder for the first
time, select your on-screen display
language by following the steps below.
1 Hold down the Lock button and set
the Power switch to v.
• The language selection screen appears.
2 Press l or m on the Operation button
to select the desired language, then
press the centre of the Operation button.
Changing
• The example screens shown are for Tape
Camera mode.
1 Press the MENU button to display the
menu screen.
2 Press l or m to select Z, then
press the centre of the Operation
button.
3 Press l or m to select “LANGUAGE”
(“SPRACHE” or “LANGUE”), then
press the centre of the Operation
button.
• The language selection screen
appears.
4 Press l or m to select the desired
language, then press the centre of
the Operation button.
• The menu screen displays in the
language selected.
5 Press the MENU button to turn off the
menu screen.
Note:
• The English, German and French
portions of this operation manual are
based on the use of on-screen displays
in their respective languages. The
portions of this manual in other
language, however, are based on the use
of English on-screen displays.
AU TOAUTO
ENGL I SH
LANGUAGE
DEUTSCH
FRAN
Ç
AIS
PAUSE
OTHERS 1
BEEP
REMOTE
DEFAULT
LANGUAGE
RETURN
DEMO MODE
EXECUTE
ENGL I SH
LANGUAGE
DEUTSCH
FRAN
Ç
AIS
ON
ON
EXECUTE
OFF
ENGL I SH
SPRACHE
SONST IGES 1
PIEPTON
FERNBDG.
VORGABEN
SPRACHE
ZUR Ü CK
DEMO- BETR.
EIN
EIN
AUSF
Ü HREN
AUS
AUSF Ü HREN
DEUTSCH
FRAN
Ç
AIS
Power switch
Operation button
MENU button
VL-Z950S-GB-006-021 04.2.3, 11:33 AM14