81
Digital Still Camera Features
Flash
Flash indicator
Flash sensor
Selecting the Flash
Mode
Available mode:
Card Camera
Using the flash function enables you to
record good-quality still images even in
dark locations.
Note:
• The effective flash range for both wide angle
and telephoto is about 1 to 2.5 m.
Types
AUTO: Flash automatically fires in
dark locations (when “LIGHT” is
displayed on the screen) each time
you press the PHOTO button. The s
indicator appears when on-screen
indicators are turned on.
ON: Flash fires every time you press
the PHOTO button. The q indicator
appears when on-screen indicators
are turned on.
OFF: Flash does not fire. The 0
indicator appears when on-screen
indicators are turned on.
1 In Card Camera mode, press the
MENU button to display the menu
screen.
2 Press l or m on the Operation
button to select Y, then press the
centre of the Operation button.
3 Press l or m to select “FLASH”,
then press the centre of the Operation
button.
4 Press l or m to select the desired
flash mode, then press the centre of
the Operation button.
5 Press the MENU button to turn off the
menu screen.
• The flash indicator appears when
on-screen indicators are turned
on.
Notes:
• Do not use the flash in front of a person’s
eyes, especially children, as flashing
directly into the eyes from close range can
damage vision. Be particularly careful
around children and maintain a distance of
1 m or more from your subject.
• Do not block the flash sensor with fingers
when using the flash.
• The q indicator flashes while the flash is
being charged.
SETT ING
RE TURN
FLASH
REC MODE
IMAGE SI ZE
RED E YE
AUTO
ON
OFF
FILE
SELF T IMER
NO.
0821
][
/
911
NORMA L
VL-Z950S-GB-078-086 04.2.3, 11:39 AM81
To Next Page
Loading...
