21
Advanced Programming
The receipt number is printed on every receipt or journal, and report, together with the date and
time. The number is incremented each time a receipt is issued. To start from a specific
consecutive number, enter a figure one less than that number.
Receipt start number (max. 4 digits) ➜
x
➜
S
(➜
S
) (Default: 0001)
Consecutive Receipt Number Programming
You can program miscellaneous settings suitable for use.
1
➜
S
➜ ABCDEFGH ➜
S
(➜
S
)
Parameters: Selection: Entry:
A Date format MMDDYY 0
DDMMYY* 1
YYMMDD 2
B Time format 12 hour format 0
24 hour format* 1
C Decimal point position for domestic currency 0 though 3 (Default: 2)
D Resetting receipt no. when issuing Z report No* 0
Yes 1
E Amount tendered compulsory for
t
No* 0
and
C
Yes 1
F Subtotaling compulsory No* 0
Yes 1
G Entry digit limit for
R
,
C
,
V
and
p
0 though 8 (Default: 8)
H Rounding Round off* 0
Round up 1
Round down 2
• Time format
When 12 hour format is set, the a.m. time will be displayed with and printed without no mark,
and the p.m. time will be displayed with and printed with the mark @.
• Amount tendered compulsory
When set for compulsory, always enter the amount tendered by the customer before finalizing the
transaction.
• Subtotaling compulsory
When set for compulsory, always press S before finalizing the transaction.
Miscellaneous Programming
A102_01(E) 05.4.18 9:06 AM Page 21
To Next Page
Loading...
