XE-A212V SPECIFICATIONS
– 3 –
6. PRINTER
1) Printer
• Part number : M-T53II
• NO. of station : 1 (Receipt or journal)
• Validation : No.
• Printing system : Line thermal
• No. of dot : 288 dots
• Dot pitch : Horizontal 0.167mm
Vertical 0.174mm
• Font : 10 dots (W) u 24 dots (H)
• Printing capacity : max. 24 characters/Line
• Character size : 1.67mm (W) u 4.17mm (H) at 10 u 24 dots
• Print pitch : Column distance 2.0mm
Row distance 5.21mm
• Print speed : Approximate 60mm/s (Approximate 12 l/s)
• Paper feed speed : Approximate 60mm/s (Approximate 12 l/s)
(Manual feed) : Approximate 60mm/s (Approximate 12 l/s)
• Reliability : Mechanism LIFE 6 million lines used to high-
quality thermal paper
• Paper end sensor : Set up
• Cutter : No
• Near end sensor : No
2) Paper
3) Logo stamp
• No
4) Printing area
Number of thermal head heater elements 288 dots
7. DRAWER
[OUTLINE]
• Standard equipment: Yes (1)
• Max. number of additional drawers: 0
• The drawer consists of:
1) Drawer box (outer case) and drawer
2) Money case
3) Lock (attached to the drawer)
[SPECIFICATION]
1) DRAWER BOX AND DRAWER
2) MONEY CASE
Layout:
3) LOCK (LOCK KEY : LKGIM7331BHZZ)
• Location of the lock:
Front
• Method of locking and unlocking:
To lock, insert the drawer lock key into the lock
and turn it 90 degrees counter clockwise.
To unlock, insert the drawer lock key and turn it
90 degrees clockwise.
• Key No: SK1-1
• Paper rolldimension: 57.5 m 0.5mm in width
Max. 80mm in diameter
• Paper quality: High-quality thermal paper
paper thickness: 0.06 to 0.08mm
0.167
(4.75) (4.75)48 (288 dots)
print area
(max.24 characters)
(units : mm)
57.5±0.5
(Paper dimension)
Model name of the drawer box SJ-420
Size 355 (W) x 424 (D) x 125 (H) mm
Material Metal
Bell –
Release lever Standard equipment: situated at
the bottom
Drawer open sensor Yes
Separation from the drawer Allowed
Separation of the bill compartments from the coin
compartments
Allowed
Bill separator –
Number of compartments 5B/8C
5B/8C
SK1-1
L
o
c
k
u
n
l
o
c
k
To Next Page
