XE-A21S PROGRAM MODE
2 – 13
27) CHANGING MEMORY TYPE
(EJ RECORD AND PLU RECORD)
X : 0 = TYPE1 (EJ: 2000 records and PLU 1200 records)
1 = TYPE2 (EJ: 3000 records and PLU 210 records)
MRS = 0
When this job is executed, EJ records are deleted and PLU records are
set the default data after deleted all records even if same memory type
is entered.
28) MAXIMUM NUMBER OF DEPARTMENTT
XX : Max Number of DEPARTMENT
This job is used for the limitation of below functions.
(1) Programming for the department code over the maximum num-
ber of department.
(2) Registration for the department code over the maximum num-
ber of department.
(3) Registration for the PLU that is associated to department over
the maximum number of department.
(4) Printing for the department data over the maximum number of
department at PGM READING and XZ REPORTS.
MRS = 99
29) SD CARD FUNCTION
[Key Sequence of SD Jobs]
(*1) When [SBTL] key is pushed, ECR prints the confirmation message
at “RECEIPT” (not print at JOURNAL) and enforces to select either
executing or canceling this job. The buffered keys are cleared.
(*2) “1” is a keyword to execute this job.
(*3) If the MODE SWITCH is turned to another mode from PGM position
or the AC POWER is off when job is executed, the job is cancelled.
Note: If AC POWER is off when ECR accesses SD CRAD, the contents
in SD CARD may be broken.
The action of each job is as below.
[JOB#140] Format SD CARD
This job formats SD card. (It deletes all data on SD card.)
After formatting card, the folder \SHARP\ECRXXX01 is made to a root
directory.
And then, \ALL, \PROGRAM, \SALES, \EJPRINT, \EJ and \LOGO are
made to a folder “\SHARP\ECRXXX01”.
The file “SRECORD.REC” is made to both folder
“\SHARP\ECRXXX01\SALES” and “\SHARP\ECRXXX01\EJ”
and it is set the default data.
Notes: • All the data currently written in SD card is erased.
• The file “SRECORD.REC” is used for control the structure
under each folder.Any users dose not need to concern its
contents.
[JOB#141] Programming data saving to SD CARD
[JOB#147] Programming Data loading from SD CARD
The below data is saved or loaded.
Files are set in the folder for “Programming Data”.
(*1) The contents of each file are same as the communication data of
“ONLINE FUNCTION”. Details of “File No.” and “Table No.” are
described in “ONLINE SPECIFICATION”. All data are converted to
use at “Customer Support Tool” software on PC.
Notes: • If there is data of the same file name, the message of confir-
mation does not display.
Data is overwritten if there is data of the same file name.
• Each files are used only for the “Customer Support Tool” soft-
ware on PC. Any users dose not need to concern its contents.
xxx : JOB code
140 : Format SD CARD
141 : Save Programming Data (ECR 3 SD)
144 : Save All RAM Data (ECR 3 SD)
145 : Load Graphic Logo Data (ECR 1 SD)
147 : Load Programming Data (ECR 1 SD)
148 : Load All RAM Data (ECR 1 SD)
X
SBTL @/FOR90
CA/AT
HEADER
*PGM*
MODE TITLE
MEMORY TYPE (0: TYPE1, 1: TYPE2)
05/02/2006 12:34PM
123456#1234
DATE/TIME/CLERK NO
MACHINE NO. /CC-NO. /CLERK NAME
#90
0
01
BETTY___
XX
SBTL @/FOR95
CA/AT
xxx 1@/FOR
CA/AT
CL
SBTLSBTL
(*1) (*2)
: Execute operation (*3)
: Cancel
File Name
File/Table
No. (*1)
Field (*1)
1 Date and Time mtimtbl D0
2 Department deptdata 01 B000
(Label, Preset, Price, Text)
3 PLU pludata 11 B000
(Label, Preset, Price, Text)
4 Function
programming
FuncText A4
Mfunctbl D8
5 Tax Table and
Rate
mtaxtbl D7
6 Logo message mlgxtbl D2
7 Clerk CsrData 51 All fields
8 Others
Programming
mopttbl D1
To Next Page
Loading...
