Sharp XE-A21S - 26) RESETTING OF ALL COUNTER AND TOTALIZER

XE-A21S PROGRAM MODE
2 – 12
[JOB#71] GT2 PROGRAMMING -- XXXXXXXXXXXXX --
MRS = 0000000000000
XXXXXXXXXXXXX : GT (13digits)
[JOB#72] GT3 PROGRAMMING -- XXXXXXXXXXXXX --
MRS = 0000000000000
XXXXXXXXXXXXX : GT (13digits)
[JOB#76] GENERAL Z1 RESET REPORT COUNTER -- XXXX --
MRS = 0000
XXXX : RESET COUNTER (4digits)
[JOB#77] GENERAL Z2 RESET REPORT COUNTER -- XXXX --
MRS = 0000
XXXX : RESET COUNTER (4digits)
[JOB#86] TRAINING CLERK PROGRAMMING -- XX --
MRS = 0
X : CLERK No. = 0 (INHIBIT), 1 to 25
23) DOMESTIC CURRENCY SYMBOL PROGRAMMING
(CHARACTERS): CHARACTER (Max. 4 Characters)
Characters can be entered by using the character layout on keyboard or
using numeric keys on keyboard.
THE KEY ENTRY SEQUENCE FOR ENTERING ONE CHARACTER
BY NUMERIC KEYS IS AS FOLLOWS:
YYY 3 [00] KEY
YYY : CHARACTER CODE (3 DIGITS)
(or [000] KEY ACCORDING TO PGM PRESET)
MRS = ___$ ( _ : space code)
This symbol is printed with (+) amount of domestic currency.
The programmed characters is printed at left side of amount.
Ex) Case of “ US$ ”:
| DEPT.01 US$
1.00 |
2
Programmed symbol
If some space characters are programmed at the left side of symbol
(like “ $”), they are not counted as the number of character of the cur-
rency symbol. (In case of “ US$”, the number of character is 3.)
Ex) Case of “ US$”: (The currency symbol means “US$”)
|AAAADEPARTMENT01 US$10000.00 |
2
Programmed symbol
24) TRAINING MODE TEXT PROGRAMMING
(CHARACTERS): CHARACTER (Max. 8 characters)
Characters can be entered by using the character layout on keyboard or
using numeric keys on keyboard.
THE KEY ENTRY SEQUENCE FOR ENTERING ONE CHARACTER
BY NUMERIC KEYS IS AS FOLLOWS:
YYY 3 [00] KEY
YYY : CHARACTER CODE (3 DIGITS)
(or [000] KEY ACCORDING TO PGM PRESET)
MRS = TRAINING
25) TEXT CHANGING (TO DEFAULT TEXT)
X: 0 = English text
3 = Spanish text
MRS = 0
When this job is executed, below texts are set as default data.
(a) Function text
(b) Each message text (LOGO, etc..)
26) RESETTING OF ALL COUNTER AND TOTALIZER
All counter, totalizer, EJ data all GTs, and all Z counter are reset.
(CHARACTERS)
SBTL SBTL85
CA/AT
NO CHANGE
(CHARACTERS)
SBTL SBTL87
CA/AT
X
SBTL @/FOR88
CA/AT
0
HEADER
*PGM*
MODE TITLE
LANGUAGE MODE
05/02/2006 12:34PM
123456#1234
DATE/TIME/CLERK NO
MACHINE NO. /CC-NO. /CLERK NAME
#88
0
01
BETTY___
SBTL 89
CA/TL
@/FOR
HEADER
*PGM*
MODE TITLE
JOB#
05/02/2006 12:34PM
123456#1234
DATE/TIME/CLERK NO
MACHINE NO. /CC-NO. /CLERK NAME
#89
01
BETTY___