XE-A21S PROGRAM MODE
2 – 8
20) [AUTO] KEY PROGRAMMING
It must be pushed same [AUTO] key as the programming [AUTO] key at
the end of any key entry.
Note: [ESC] key cannot be set at [AUTO] key programming.
It acts as a key of ERROR ESCAPE function in this programming.
< [Auto] key function >
This machine has [AUTO] key which can be programmed the
key-sequence data.
When [AUTO] key is depressed, the machine works as same as the
programmed key-sequence is entered.
21) DATE/TIME PROGRAMMING
Note: It cannot set the non-exist date (like Feb.-30th).
22) VARIOUS PROGRAMMING
(EACH FUNCTIONS PROGRAMMING)
There are programmed by depressing ST-key after a data that want to
set. And it is operated continuously until depressing the TL-key.
[JOB#1] MACHINE No. (6digits) -- XXXXXX --
MRS = 000000
[JOB#2] CONSECUTIVE No. (4digits) -- XXXX --
MRS = 0000
[JOB#5] FUNCTION SELECT -- ABCDEFGH --
MRS = 00000001
[JOB#6] PRINT FORMAT -- ABCDEFGH --
MRS = 11000011
Note: Case of RECEIPT, ECR is controlled the Journal Rewind Motor
as below.
Executing mode :
REG, MGR, OPXZ, X1/Z1, X2/Z2
Setting mode :
PGM
DATE) XXXXXXXX: YYYYMMDD (Year-month-day) or
DDMMYYYY (Day-month-Year) or
MMDDYYYY (Month-day-Year)
(YYYY: 2000 to 2099)
(MM: 01 to 12)
(DD: 01 to 31)
The date entry format complies with the applicable PGM-mode
programming.
TIME) HH: Hour (00 to 23)
MM: Minute (00 to 59)
MRS = DATE: 01012000 (MM/DD/YYYY)
TIME: 0000
(Free key)
max 25
Delete
AUTO AUTO
CA/AT
XXXXXXXX
DATE
HHMM
TIME
#/SBTL
(NK) #/SBTL
0
AB
AB : JOB No.
NK : PROGRAMMING DATA. (Numeric Keys)
CA/AT
#/SBTL @/FOR
A: PO in REG mode A
ENABLE 0 ★
DISABLE 1
B: RA in REG mode B
ENABLE 0 ★
DISABLE 1
C: SUBTOTAL VOID in REG mode C
ENABLE 0 ★
DISABLE 1
D: INDIRECT VOID in REG mode D
ENABLE 0 ★
DISABLE 1
E: DIRECT VOID in REG mode E
ENABLE 0 ★
DISABLE 1
F: REFUND in REG mode F
ENABLE 0 ★
DISABLE 1
G: NO SALE in REG mode G
ENABLE 0 ★
DISABLE 1
H: FRACTIONAL QUANTITY H
YES (3digits decimal place) 0
NO 1 ★
A: PRINTER FORMAT A
JOURNAL 0
RECEIPT 1 ★
REG/MGR/VOID mode : Journal Rewind Motor is not driven.
PGM/OPXZ/XZ mode : Journal Rewind Motor is driven for
rewinding reports anytime.
B: CONTENTS OF RECEIPT B
TOTAL 0
DETAIL 1 ★
C: TIME PRINTING (for all receipt) C
PRINT 0 ★
NOT PRINT 1
D: DATE PRINTING (for all receipt) D
PRINT 0 ★
NOT PRINT 1
To Next Page
Loading...
