Sharp XE-A21S - Page 12

XE-A21S PROGRAM MODE
2 – 9
[JOB#7] RECEIPT PRINT FORMAT -- ABCDEFGH --
MRS = 00000000
[JOB#10] POWER SAVING -- YXXX --
MRS = 0030
[JOB#11] LOGO PRINTING -- A --
MRS = 1
[JOB#15] FUNCTION SELECT2 -- ABCDEFGH--
MRS = 000000000
[JOB#19] QUANTITY FOR DOUGHNUT EXEMPT -- XX --
(for CANADIAN TAX)
MRS = 0
xx : QUANTITY FOR DOUGHNUT TAX EXEMPT = 0 to 99
[JOB#35] ONLINE COMMUNICATION TIME OUT -- XXX --
MRS = 007
XXX: Time out time (1 to 255 sec)
[JOB#50] THERMAL PRINTER DENSITY CONTROL -- XX --
MRS = 50
XX: density (00 to 99)
00 : 70 % for standard
50 : 100 % (Standard density)
99 : 130 % for standard
[JOB#61] OTHERS1 PROGRAMMING -- ABCDEFGH --
MRS = 00100002
E: CONSECUTIVE NO. PRINTING E
PRINT 0
NOT PRINT 1 ★
F: Not used (Fixed at “0”)
G: ZERO SKIP IN PLU REPORT G
NOT SKIP 0
SKIP 1 ★
H: ZERO SKIP IN GENERAL,CLERK,HOURLY H
NOT SKIP 0
SKIP 1 ★
A, B: Not used (Fixed at “00”)
C: SUBTOTAL PRINT [AT] [SBTL] KEY C
NOT PRINT 0 ★
PRINT 1
D: MDSE SBTL PRINT AT [MDSE SBTL] KEY D
NOT PRINT 0 ★
PRINT 1
E, F, G: Not used (Fixed at “000”)
H: PURCHASE NO. PRINTING H
PRINT 0 ★
NOT PRINT 1
Y: POWER SAVING function when a time is displayed Y
Yes (Enable) 0 ★
No (Disable) 1
XXX: POWER SAVING TIME to POWER OFF
= 001 to 254 (minutes)
or 999 (Inhibit)
A: LOGO MESSAGE CONTROL A
3-LINE HEADER INSTEAD OF GRAPHIC LOGO 0
GRAPHIC LOGO ONLY 1 ★
GRAPHIC LOGO AND 3-LINE FOOTER 2
6-LINE HEADER 3
GRAPHIC LOGO AND 3-LINE HEADER 4
3-LINE HEADER AND 3-LINE FOOTER 5
A, B, C, D, E, F: Not used (Fixed at “000000”)
G: TAX DELETE in REG mode G
ENABLE 0 ★
DISABLE 1
H: MANUAL TAX in REG mode H
ENABLE 0 ★
DISABLE 1
A, B: Not used (Fixed at “00”)
C: Programming of MINUS dept/PLU C
Disable 0
Enable 1 ★
D: Fractional treatment D
Round off (4-DOWN, 5-UP) 0 ★
Raising to unit 1
Disregarding 2
E:
[00] key or [000] key selection for [00] key position E
[00] key 0 ★
[000] key 1
F: Time format F
12hour 0 ★
24hour 1
G: Date format G
M-D-Y 0 ★
D-M-Y 1
Y- M - D 2
H: TAB H
00
11
22★
33