Sharp XL-45H - Listening to a Cassette Tape

02/10/1 XL_45H_H_E4.fm
E-21
ENGLISH
XL-45H
Tape Playback
Listening to a cassette tape
Before playback:
z
For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not recommend-
ed.)
z
Do not use C-120 tapes or poor-quality tapes, as they may
cause malfunctions.
z
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "TAPE" appears on the
display.
When operating with the remote control, press the TAPE but-
ton.
3
Open the cassette compartment by pushing the area
marked "PUSH EJECT ".
4
Load a cassette into the cassette
compartment with the side to be
played facing toward you.
5
Close the cassette compartment by pushing the area
marked "PUSH EJECT ".
6
Press the button to start playback.
When playback is performed using the remote control, press
the button.