Sharp XL-MP110E - Recording from CD;MP3;WMA to Tape; Recording Process Steps

25
XL-MP110E
Tape Recording
 Recording from a CD or MP3/WMA disc
You can record the desired disc using the CD DIRECT PLAY button.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
/
RRMCGA041AWSA
/
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3 Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the CD DIRECT PLAY button to
start recording.
 Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
 Playback of the disc will start approximately 7 seconds after
the tape starts.