XL-MP9H
2 – 3
• VOLUME test (TEST 3)
Starting from level 23 (default), check all the levels (0 - 23 - MAX).
• TIMER test (TEST 4)
At 1:05, the power turns on to activate the tape function, and turns off after 90 seconds (equivalent to 90 minutes on the unit).
• Display test (TEST 5)
When test mode is activated, the entire display lights up. As the “PLAY” key is pressed, half of the display lights up alternately.
• ALL KEY test (TEST 6)
In the test mode, hold down all the buttons on the main unit and then press the “ON/STAND-BY”button. “OK” appears.
If only the “ON/STAND-BY” button is pressed, “ERROR” appears.
• Tuner clear test (TEST 7)
All tuner preset stations are cleared.
• Soft reset test (TEST 8)
All data in RAM is cleared.
To Next Page
Loading...
