Why is my Sharp XL-UR14H Stereo System remote control not working?
If the remote control is not operating, verify that the unit's AC power lead is plugged in. Check if the battery polarity is correct and if the batteries are dead. Also, ensure that the distance or angle is correct and that the remote control sensor isn't exposed to strong light.
What to do if no sound is heard from my Sharp XL-UR14H?
If you cannot hear any sound, check if the volume level is set to 'MIN'. Also, ensure that the headphones are not connected and that the speaker wires are properly connected.
What to do if my Sharp Stereo System does not respond when a button is pressed?
If the unit does not respond when a button is pressed, set the unit to the power stand-by mode and then turn it back on. If the unit still malfunctions, reset it.
What to do if Sharp XL-UR14H playback does not start or stops?
If playback does not start, stops in the middle, or isn't performed properly, check if the disc is loaded upside down. Ensure the disc meets the required standards and is not distorted or scratched.
Why does my Sharp XL-UR14H radio make unusual noises?
If the radio makes unusual noises continuously, check if the unit is placed near a TV or computer. Ensure the FM aerial is placed properly and, if near the AC power lead, move it away.
How to fix skipped or stopped playback on my Sharp XL-UR14H?
If playback sounds are skipped or stopped in the middle of a track, verify that the unit is not located near excessive vibrations. Check if the disc is very dirty or if condensation has formed inside the unit.
What to do if Sharp XL-UR14H device cannot be detected?
To solve this, check if there is any MP3/WMA file available, ensure the device is properly connected and if it is an MTP device. Also, verify if the device contains AAC file only.
Why won't playback start on my Sharp XL-UR14H Stereo System?
If playback does not start, check if it is a copyright protected WMA file or a false MP3 file.
Why is the time display wrong on my Sharp XL-UR14H Stereo System?
If the time display is wrong, it might be due to a power failure. Reset the clock.
Warnings about voltage, power cord handling, and protection against liquids.
How to play CDs and MP3/WMA discs, including basic playback controls and track selection.
Instructions for directly accessing specific tracks on a disc using numeric buttons.
Explains how to set repeat play for tracks or discs, and random playback order.
How to program a sequence of tracks for playback from CDs or MP3/WMA discs.
Guides on playing MP3/WMA files organized in folders, with and without folder mode.
Instructions for safely removing USB devices and playing MP3/WMA files from them.
Guide on how to record audio from CDs onto a USB memory device.
Instructions for recording programmed sequences and how USB folders are structured.
How to manually and automatically tune into FM radio stations.
Covers general, CD player, remote control, tuner, and USB troubleshooting steps.
Instructions on how to reset the unit to its factory default settings, clearing all memory.
General| Bluetooth | No |
|---|---|
| CD Player | Yes |
| FM Radio | Yes |
| USB Playback | Yes |
| Tuner | FM |
| Speaker Configuration | 2.0 |
| Type | Micro Hi-Fi System |
| Audio Output Power | 10W + 10W |
To Next Page
