7
English
and operating steam button. Do not operate unit if steam vents are
blocked.
- When filling unit, only distilled water should be used - other cleaning
agents could damage unit or cause injury.
- Do not attempt to use unit without properly filling Water Tank / Water
Reservoir. To avoid burns from escaping steam when refilling tank:
Press and hold steam button to release all remaining steam pressure
and always allow unit to cool before refilling.
- Use caution when carrying unit up stairs or over obstacles, or when
using unit on or near an uneven surface.
- Burns can occur from touching hot plastic parts, hot water, or steam.
Do not touch Steam Nozzle or attempt to connect any accessories
while unit is in use. Use caution when you turn unit upside-down -
there may be hot water inside.
- When steaming any fabric for the first time, it is recommended that
you consult the manufacturer’s guidelines for the material being
steamed. For items in question, test on an inconspicuous area before
proceeding.
- Synthetic materials (such as 100% nylon or polyester) are sensitive
to heat, and may be damaged by exposure to hot steam. Steam is
recommended for use only on natural fibers such as cotton, linen or
wool, as well as nylon or polyester blends.
- Do not use unit where aerosol-based products are being used, or
where oxygen is being administered.
To Next Page
Loading...
