8 English
SERVICING WARNING – To reduce risk of fire, electrical shock and injury to
persons, observe the following:
- If Steam Status Light does not illuminate when unit is plugged in
and Button is set to “ON” position, unit is not operating normally.
Immediately disconnect cord from power supply, then refer to
troubleshooting guide on Page 18 of this manual for assistance.
- Always allow unit to cool (30 minutes for complete cooling) and
empty Water Tank / Water Reservoir before storing.
- Clean your product regularly, only as is instructed in this manual. Prior
to cleaning, turn off the power on your product and unplug. Do not use
gasoline, thinners, solvents, ammonias or other chemicals for cleaning.
Refer to the cleaning instructions provided.
READ AND SAVE THESE
INSTRUCTIONS
To Next Page
Loading...
