ShelterLogic Peak Style 8' W x 8' H User Manual

ShelterLogic, LLC
150 Callender Road
Watertown, CT 06795
www.shelterlogic.com
1-800-524-9970
1-800-559-6175
Canada:
Assembly Instructions
8' W x 8' H or 10' H
Peak Style
Frame Assembly
Before you start: 2+ individuals recommended for assembly, approximate time 3 hours.
Recommended tools: Power Drill, Safety Glasses, Rope, Tape Measure, Ratchet with Socket Set,
Adjustable Wrench, Step Ladder, Rubber Mallet, Utility Knife, 5/8 Concrete Drill Bit, Sledge Hammer.
05-10DT13-0A

ShelterLogic Peak Style 8' W x 8' H Specifications

General

Brand	ShelterLogic
Model	Peak Style 8' W x 8' H
Category	Tent
Language	English

Summary

Frame Assembly Preparation

Getting Started

Prerequisites and assembly time recommendation for the shelter.

Recommended Tools

List of tools required for the shelter assembly process.

Building the Structural Frame

Plotting and Squaring the Frame

Preparing the site and ensuring the frame area is square.

Assemble End and Middle Ribs

Assembling the main rib sections of the shelter frame.

Install Side Rails and Shelterlock Stabilizer Blocks

Attaching side rails and securing them with stabilizer blocks.

Install Wind Braces

Attaching wind braces for structural support and stability.

Install Top Rail

Securing the top rail to the main frame structure.

Shelter Base and Panel Installation

Secure Base Feet

Attaching the base feet to the shelter legs for stability.

Install Auger Anchors

Securing the shelter to the ground using auger anchors.

Zipper Door and End Panel Installation

Installing the end panels with zippers for shelter access.

Cover Installation and Securing

Installing the Cover on the Frame

Laying and positioning the shelter cover over the frame.

Securing Your Cover

Tightening the cover using ratchets and installing cover rails.