To Next PageTo Next PageWhy is there no sound coming from my Sherwood Receiver?
If your Sherwood Receiver has no sound, check the speaker connections and ensure they are secure. Adjust the master volume to a suitable level. Make sure the MUTE button is not activated. Verify that the selected decoding mode matches the input signal format. Confirm that you've selected the correct input source and that all connections between components are correct.
How to fix a Sherwood Newcastle R-963 Receiver that has no power?
If your Sherwood Receiver isn't turning on, make sure the AC input cord is securely connected. Test the AC wall outlet with a lamp or another appliance to ensure it's working.
What to do if the Sherwood Newcastle R-963 remote control is not working?
If the remote control for your Sherwood components isn't working, first, replace the batteries in the remote. If that doesn't work, make sure there's nothing blocking the remote sensor on the Sherwood Receiver.
How to improve poor FM reception on Sherwood Receiver?
If you're experiencing poor FM reception on your Sherwood Receiver, ensure that an antenna is connected. Try repositioning the antenna to find the best signal.
Why is there no sound from the surround speakers on my Sherwood Newcastle R-963?
If you're not getting any sound from the surround speakers on your Sherwood Receiver, check that a surround mode is selected instead of normal stereo mode. Adjust the master volume and surround level. Ensure you are using a stereo or surround source. Verify that the surround speaker setting is not set to “None”.
What to do if there is no sound from the center speaker on Sherwood Receiver?
If you're not hearing sound from the front center speaker of your Sherwood Receiver, ensure that you've selected a surround mode instead of Dolby Virtual or normal stereo mode. Check that the center speaker setting isn't set to “None”. Adjust the master volume and center level.
How to fix Sherwood Newcastle R-963 when stations cannot be received?
If you cannot receive stations on your Sherwood Receiver, connect an antenna. Tune in the desired station frequency. Try moving the antenna to a different position and retry tuning.
Why no sound from surround back speakers Sherwood Receiver?
If you're not getting any sound from the surround back speakers on your Sherwood Receiver, ensure that the input signal format or the current surround mode supports 7.1 or 6.1 surround. Verify that the power amplifier for the surround back channels is assigned to the surround back channels and not ROOM 2. Adjust the master volume and surround back level. Make sure the surround back speaker setting is not set to “None”.
How to stop hissing noise during FM reception on Sherwood Receiver?
If your Sherwood Receiver is producing continuous hissing noise during FM reception, especially when receiving a stereo broadcast, try changing the position of the antenna. Consider installing an outdoor FM antenna.
How to stop hissing noise during AM reception on Sherwood Receiver?
If your Sherwood Receiver is experiencing continuous or intermittent hissing noise during AM reception, especially at night, keep the receiver away from noise sources like motors or fluorescent lamps. Consider installing an outdoor AM antenna.
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Analog Audio Outputs | 1 |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Surround Sound Formats | DTS Neo:6 |
| Frequency Response | 10 Hz - 100 kHz |
| Digital Audio Inputs | 4 (2 optical, 2 coaxial) |
| Digital Audio Outputs | 1 (optical) |
Details the process of unpacking and setting up the receiver for installation.
Instructions for connecting FM and AM antennas for optimal reception.
Guide to connecting various audio sources like CD players and tape decks.
How to connect components with 5.1 or 7.1 channel audio outputs.
How to connect digital audio sources and outputs using optical and coaxial cables.
Explains basic functions for Sherwood and OSD modes using the remote.
Details the operational range for the ROOM 2 remote control.
Instructions for loading batteries into the ROOM 2 remote.
Accessing and navigating the OSD menu for setup and configuration.
