To Next PageTo Next PageHow to fix Sherwood Receiver when preset stations cannot be received?
If your Sherwood Receiver is not receiving preset stations, try memorizing the correct station frequency. If that doesn't work, memorize the stations again.
Why other Sherwood components do not react to remote control commands?
If other Sherwood components aren't responding to remote control commands, ensure that the DIGI LINK connections are properly made.
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Analog Audio Outputs | 1 |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Surround Sound Formats | DTS Neo:6 |
| Frequency Response | 10 Hz - 100 kHz |
| Digital Audio Inputs | 4 (2 optical, 2 coaxial) |
| Digital Audio Outputs | 1 (optical) |
Details the process of unpacking and setting up the receiver for installation.
Instructions for connecting FM and AM antennas for optimal reception.
Guide to connecting various audio sources like CD players and tape decks.
How to connect components with 5.1 or 7.1 channel audio outputs.
How to connect digital audio sources and outputs using optical and coaxial cables.
Explains basic functions for Sherwood and OSD modes using the remote.
Details the operational range for the ROOM 2 remote control.
Instructions for loading batteries into the ROOM 2 remote.
Accessing and navigating the OSD menu for setup and configuration.
