Need help?Do you have a question about the Sherwood RV-5050RDS and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Channels | 2 |
| Tuning range | FM, MW |
| FM/AM | Yes |
| Total Harmonic Distortion (20Hz-20kHz) | 0.05% |
| Input Sensitivity (MM) | 2.5mV |
| Input Sensitivity (line) | 150mV |
| Signal to noise ratio (line) | 90dB |
| Signal-to-Noise Ratio (IHF-A) | 90dB |
| Video Connections | Composite |
| Frequency Response | 20Hz to 20kHz |
| Signal-to-Noise Ratio | 90dB |
| Dimensions (W x H x D) | 435 x 146 x 370 mm |
Overview of the Sherwood RV-5050RDS Stereo A/V Pro-Logic Receiver.
Guidance on unpacking, placement, and safety measures for the receiver.
Instructions for setting the correct AC voltage based on geographical region.
Connecting antennas (FM/AM) and audio sources like turntable, CD player, cassette decks.
Description of power button, speaker selectors, and headphone jack.
Connecting ground, turntable, CD player, and tape deck inputs.
Connecting VCRs, TV monitors, and pre-amplifier outputs.
Connecting center/rear speakers and the AC input cord.
Buttons for radio tuning, input selection, bass, and treble adjustments.
VCR selector, tape monitor button, and surround/center mode selection.
Master volume control, fluorescent display, and RDS mode buttons.
Overview of the remote control's buttons and their primary operational functions.
Buttons for CD/cassette playback, recording, and test tone adjustments.
Adjusting speaker levels, understanding remote range, and battery installation.
Detailed explanation of Dolby Pro Logic and Dolby 3 Stereo surround sound processing.
Visual guides for speaker placement in Dolby Pro Logic and Dolby 3 Stereo modes.
Steps to fine-tune surround sound parameters like test tone, levels, and delay time.
Explanation of RDS data (PS, PTY, TA, CT) and how to view it.
How to automatically find RDS stations and search for specific program types.
Initial setup and fundamental operations for using the receiver.
Methods for tuning radio stations, including direct entry and presets.
Procedures for listening to FM broadcasts and recording with cassette decks.
Guide to recording video from one source and audio from another.
Solutions for common operational problems like no power, sound, or remote control malfunctions.
Solutions for poor reception, missing stations, and noise during AM/FM broadcasts.
Detailed technical specifications for the amplifier output, distortion, sensitivity, and frequency response.
Technical specifications for the FM/AM tuner, unit dimensions, and weight.
To Next Page
