To Next PageTo Next PageHow to fix a Sherwood RVD-9090R Receiver with no power?
If your Sherwood Receiver has no power, ensure the AC input cord is securely connected. Also, check the AC wall outlet by testing it with a lamp or another appliance to confirm it is active.
What to do if my Sherwood RVD-9090R has no sound?
If there is no sound from your Sherwood Receiver, check the speaker connections to ensure they are properly connected. Also, adjust the master volume to an audible level and make sure the MUTE button is not activated. Verify that the speakers are switched on by pressing the SPEAKER button. Finally, confirm that you have selected the correct input source and that all components are correctly connected.
Why my Sherwood RVD-9090R is not receiving stations?
If your Sherwood Receiver isn't receiving stations, make sure an antenna is connected. Then, tune in the desired station frequency. If the issue persists, try moving the antenna to a different position and re-tune.
How to troubleshoot no sound from rear speakers on Sherwood Receiver?
If there is no sound from the rear speakers of your Sherwood Receiver, first check that surround mode is enabled. Then, adjust both the master volume and the rear level to ensure they are not too low. Also, verify that you are using a stereo or surround source, not a monaural one. Finally, check that the rear speaker setting is correctly configured.
Why Sherwood RVD-9090R Receiver remote control unit does not operate?
If your Sherwood Receiver's remote control isn't working, replace the batteries first. If that doesn't solve the problem, check for any obstructions blocking the remote sensor.
What to do if no sound from the center speaker on Sherwood RVD-9090R?
If there is no sound from the center speaker of your Sherwood Receiver, ensure that the surround mode is enabled. Also, verify that the center speaker setting is correctly configured. Finally, adjust the master volume and center level to appropriate levels.
How to improve poor FM reception on Sherwood Receiver?
If your Sherwood Receiver has poor FM reception, connect an antenna. If an antenna is already connected, try changing its position for better reception.
What to do if preset stations cannot be received on Sherwood RVD-9090R Receiver?
If your Sherwood Receiver isn't receiving preset stations, try memorizing the correct station frequency. If that doesn't work, the memorized stations may have been cleared, so memorize the stations again.
Why continuous hissing noise during AM reception on Sherwood RVD-9090R Receiver?
If you are experiencing continuous or intermittent hissing noise during AM reception on your Sherwood Receiver, especially at night, the noise may be caused by motors, fluorescent lamps, or lightning. Try to keep the receiver away from these noise sources. You can also try installing an outdoor AM antenna.
Why continuous hissing noise during FM reception on Sherwood RVD-9090R?
If you are experiencing a continuous hissing noise during FM reception on your Sherwood Receiver, especially when a stereo broadcast is received, it could be due to weak signals. Try changing the position of the antenna. If the problem persists, consider installing an outdoor antenna.
Provides instructions for unpacking and setting up the receiver.
Details how to set the unit's voltage for different regions.
Instructions for connecting front, rear, and center speakers.
Guides on connecting digital audio sources via coaxial or optical.
Guides for connecting audio and video sources like CD, VCR, DVD.
Instructions for connecting antennas and power cords, and PRE OUT.
Explains the information shown on the receiver's display.
Details the function and usage of front panel input jacks.
Specifies remote range, angles, and battery insertion.
Guides on setting speaker size, levels, and delay times.
Covers turning on, selecting inputs, and listening to radio.
Explains and guides the selection of various surround sound effects.
Details recording, dynamic range compression, and sleep timer.
Shows status messages and guides menu operations for setup.
General
