Need help?Do you have a question about the Sherwood RV-5080RDS and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion | 0.05% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Video Connections | Composite, S-Video |
| Frequency Response | 10 Hz - 100 kHz |
| Tuning range | FM: 87.5 - 108 MHz |
| Speaker load impedance | 4 - 16 ohms |
| Tuner Section | RDS |
Essential safety guidelines for servicing the unit to prevent electrical shock and fire hazards.
Detailed technical specifications for the front amplifier stage, including input sensitivity, power output, and harmonic distortion.
Detailed performance specifications for the FM tuner section, including sensitivity, selectivity, and stereo separation.
Procedures for aligning the AM and FM tuner sections, including equipment required and test points.
Steps for tuning and adjusting the FM receiver section for optimal performance, including THD and level calibration.
Procedures for aligning the multiplex (MPX) stereo decoder section, focusing on separation adjustments.
Guidance on diagnosing and resolving common operational issues, such as no sound, power failures, or inoperative controls.
Resolving problems related to volume control, tuning, stereo indicators, and AM/FM reception failures.
Addressing issues with specific components like FL display, encoder volume, and remote control unit failures.
To Next Page
