To Next PageTo Next Page
Need help?Do you have a question about the Sherwood RVD-8090R and is the answer not in the manual?
General| Tuning range | FM: 87.5 - 108 MHz, AM: 522 - 1611 kHz |
|---|---|
| Frequency response | 10Hz-100kHz (+1dB, -3dB) |
| Total harmonic distortion | 0.08% (20Hz-20kHz, 8 ohms) |
| Input sensitivity (MM) | 2.5 mV |
| Input sensitivity (line) | 200 mV |
| Signal to noise ratio (MM) | 80 dB |
| Output (line) | 200 mV |
| Video Connections | composite, S-Video |
| Dimensions | 440 x 150 x 380 mm (W x H x D) |
| Weight | 10.5 kg |
| Speaker load impedance | 8 ohms |
| Digital inputs | 1 optical, 1 coaxial |
| AM Sensitivity | 20uV |
| Signal-to-Noise Ratio | 95 dB |
Guidance on unpacking the receiver and proper placement for ventilation and cabling convenience.
Safety precautions for 120 V AC operation, including polarized plug usage.
Safety guidelines for 240 V AC operation, emphasizing proper earthing of power points.
Instructions on setting the AC voltage selector switch for different country power supplies.
Instructions for connecting FM and AM antennas for optimal signal reception.
Guidelines for connecting speakers, including impedance and correct polarity.
How to configure speaker size (Large/Small/None) and subwoofer presence.
How to set individual speaker volume levels for optimal audio balance.
Setting speaker delay times to optimize sound arrival for surround effects.
Step-by-step guide on how to select and listen to various audio and video sources.
Details on the 6 available surround sound modes: DTS, Dolby, Pro Logic, Theater, Hall 1, Hall 2.
How to select and use different surround sound modes for optimal audio experience.
A guide to diagnosing and resolving common operational problems with the receiver.
Technical details and performance metrics for the amplifier, digital audio, and tuner sections.
