HYDRAULIC LIFT SYSTEM CONTROLS
LIFT CONTROL LEVER
The front mounted equipment can be raised
and lowered by the lift control lever. Place
handle in the forward position to lower and to
the rearward position to raise front mounted
equipment.
To lower and float the equipment, pull the lever
forward. To raise the equipment, pull the lever
rearward and hold it until the equipment is
raised to the desired position.
WARNING: TO AVOID PERSONAL INJURY,
DISENGAGE THE PTO CONTROL LEVER
BEFORE OPERATING THE LIFT CONTROL
LEVER.
WEIGHT TRANSFER CONTROL
This feature enables the operator to transfer the
weight of the mower or other equipment to the
tractor unit.
Turn the knob clockwise, the effort of weight
transfer is increased, refer to page 2-18 for
weight transfer operating instructions.
2-10
OPERATION
LIFT CONTROL LEVER
WEIGHT TRANSFER VALVE
To Next Page
Loading...
