3
2. DESCRIPTION
This machine consists of the drill motor and drill stand. This machine is designed for wet drilling in
walls and floors made of concrete, natural stone and other mineral building materials using diamond
core bits (diamond tools). The drill motor must be mounted on a Shibuya drill stand: TS-255 800L,
TS-255 1000L, or TS-255(AB52) 1000L. Handheld use is not permissible.
2.1 Applications of the machine
Drilling reinforced concrete for piping works
Extracting concrete cores for strength testing
Overall drilling in reinforced concrete, except drilling upwards
3. IMPORTANT NOTICE
DANGER
Improper use of the diamond core drilling machine may lead to serious or fatal injuries.
Read, understand and follow this manual carefully before the operation.
This machine is designed for core drilling operations. Never use it for any other purposes.
Do not use it as a hand-held core drill.
WARNING
This machine is intended for industrial applications by experienced operators.
Always use common sense and plan your work to avoid injuries. It is not possible to cover
all risks which may occur during the operations in this manual. Therefore, enough care
must be taken to ensure the safe operation of this machine.
NOTE
Shibuya Company, Ltd. reserves the right to change specifications of products without any prior
notices.
Copyright reserved on this manual. Publication of the technical information and drawings in this
manual, and duplication without prior permission of Shibuya Company, Ltd. is prohibited.
To Next Page
Loading...
