Shihlin electric SF3 Series User Manual

M8057
Status Monitoring (ALARM)
Alarm occurred
M8059
Custom status output
Monitor the output selected by D8059.
M8060
High-speed input count start
After setting, start high-speed input pulse counting.
R/W
M8061
High-speed input count
value clear
After setting, the high-speed input count value is reset
to zero.
R/W
M8065
Overvoltage
0: Inverter PN is not over-voltage 1: Inverter PN is
over-voltage
R
M8066
low voltage
0: Inverter PN is not under low voltage
1: Inverter PN low voltage
R
M8067
PLC operation monitoring
0: PLC is not running
1: PLC is in RUN state
R
M8068
Inverter is about to reset
0: The inverter will not be reset
1: The inverter will reset (Note 2)
R
M8069
Inverter Tuning status
monitoring
0: The inverter is not in Tuning state
1: The inverter is in Tuning state
R
M8070
Power-off sign
0: Not sure
1: The inverter is in a power-off state
R
Note: 1. Special operations can be performed only when M8035 is 0. The special operation refers to the
operation of D8153. M8035 can be cleared through communication, PLC program and PLC STOP.
2. When M8068 is 1, it means the inverter is about to be reset. At this time, the customer can make
preparations for the inverter reset in advance.
3. When M8049 is OFF, D8059 and the existing record data of D8060 will not be cleared.

Shihlin electric SF3 Series Specifications

General

Brand	Shihlin electric
Model	SF3 Series
Category	Controller
Language	English