Shihlin electric SF3 Series User Manual

Command
Function
MPS
Put the connection point data into the stack, and use the MPS instruction once to send the current
intermediate result into the first layer of the stack. Move the data that originally existed in the first layer
down one layer.
MRD
Read the top data of the stack. The MPR instruction reads the latest data of the stack memory, and
the data of other layers remains unchanged.
MPP
Fetch the topmost data of the stack memory. The uppermost layer data using the MPP stack memory
is read out, and other data are sequentially moved to the upper layer.
Operand
None
Ladder： Command：
LD X10
MPS
AND X11
OUT Y0
MRD
AND X12
OUT Y1
MPP
AND X13
OUT Y2
Command
Function
OUT
Output instruction, used to output the logic result to the designated relay coil.
Operand
X
Y
M
T
C
D
NO
OK
OK
OK
OK
NO
Ladder： Command：
LD X0
OUT Y0
Command
Function
SET
Set the instruction to keep the coil (set to 1).
Operand
X
Y
M
T
C
D
NO
OK
OK
NO
NO
NO
Ladder： Command：
LD X0
SET M0
X10
Y0
X12
Y1
X13
Y2
MPS
MRD
MPP
X11
X0
Y0
X0
SET M0

Shihlin electric SF3 Series Specifications

General

Brand	Shihlin electric
Model	SF3 Series
Category	Controller
Language	English