To Next Page
Z
Zoe WalkerAug 4, 2025
Why does the display fluctuate on my Shimadzu BL320H?
- FfarrellamandaAug 4, 2025
If the display on your Shimadzu Scales fluctuates, it could be due to several factors. External influences like vibration, wind, electric noise, or electromagnetic waves can cause fluctuations; try improving the installation site or maintaining distance from the noise source. The issue might also stem from an instantaneous power failure; in this case, press the POWER/BRK key to return to weight display mode. Also, the averaging processing may be in High-stability mode; consider changing the measurement mode if necessary.
General
