Shimadzu BL2200H User Manual

ELECTRONIC BALANCE
BL SERIES
BL320S(L), BL620S(L),
BL3200S(L), BL220H(L),
BL320H(L), BL2200H(L),
BL3200H(L)
INSTRUCTION MANUAL
M054-E089I

Shimadzu BL2200H Specifications

General

Brand	Shimadzu
Model	BL2200H
Category	Scales
Language	English

Summary

Safety Precautions

Meaning of Caution Signs

Explains the meaning of caution and notice symbols used.

Introduction

Display and Keypad

Display Indicators

Details the various indicators and symbols shown on the balance display.

Keypad Functions

Explains the function of each key on the balance control panel.

Installation

Power Requirements and Safety

Instructions for verifying power adapter compatibility and connection safety.

Installation Site Selection

Guidance on selecting an appropriate environment for balance installation.

Warm-up Procedure

Caution Notes

Measurement Procedure

Weighing Preparation

Steps required before starting a weighing operation.

Basic Weighing Operation

Procedure for performing a basic weighing operation with tare.

Menu Selection

Function Menu Selection

Navigating menus for function settings like zero tracking and unit selection.

Interface Menu Settings

Configuring communication parameters like baud rate and parity.

Sensitivity Calibration

Setting Calibration Weight Value

How to input the calibration weight value.

Performing Sensitivity Calibration

Step-by-step guide for performing sensitivity calibration.

Unit Management

Registering Units

Procedure to register new measurement units.

Cancelling Units

Procedure to remove a registered measurement unit.

Changing Units

Procedure to modify an existing unit setting.

% Setting

PCS (Piece Counting) Setting

Performance Checks

Preparation for Checks

Steps to prepare the balance for performance checks.

Repeatability Test

Method for checking measurement repeatability.

Maintenance

Cleaning Instructions

Instructions for cleaning the balance when dirty.

Troubleshooting

Specifications

Parts List

Optional Accessories

List of optional accessories like printers and interfaces.

Maintenance Parts

List of parts for balance maintenance and repair.

Peripheral Devices

EP-60A Electronic Printer

Details on connecting and using the EP-60A printer.

IFB-102A RS-232C Interface

Information on connecting the balance to a PC via RS-232C.

Input/Output Format

Explanation of data formats for communication.

Command Codes

List of command codes for controlling the balance via PC.

Unit Conversion Details