Shimadzu BL620S User Manual

ELECTRONIC BALANCE
BL SERIES
BL320S(L), BL620S(L),
BL3200S(L), BL220H(L),
BL320H(L), BL2200H(L),
BL3200H(L)
INSTRUCTION MANUAL
M054-E089I

Shimadzu BL620S Specifications

General

Maximum Capacity	620 g
Readability	0.001 g
Display	LCD
Power Supply	AC adapter
Linearity	±0.002 g
Response Time	Approx. 3 seconds
Operating Temperature	5 to 40 °C
Interface	RS-232C
Calibration	External
Repeatability	0.001 g
Pan Size Diameter	110 mm

Summary

Safety Precautions

Meaning of Caution Signs

Explains caution and notice symbols for safety.

Introduction

Welcome and Manual Guidance

Welcomes user and advises reading the manual.

Components and Their Names

Included Components List

Lists all items provided with the balance.

Balance Component Diagram

Visual representation of balance parts.

Display and Keypad

Display Indicators Overview

Describes symbols and indicators on the balance screen.

Keypad Functionality

Explains the operation of each balance button.

Installation

Power Voltage and Site Requirements

Guidelines for power connection and installation location.

Leveling the Balance

Step-by-step instructions for proper balance leveling.

Warm-up Procedure

Ensuring Optimal Operating Temperature

Steps to warm up the balance for accuracy.

Measurement Procedure

Preparation and Performing Measurement

Steps for setting up and conducting measurements.

Menu Selection

Function Settings

Details on selecting functions like zero tracking and stability detection.

Interface Settings

Details on configuring communication and output formats.

Sensitivity Calibration

Setting Calibration Weight Value

Procedure to input the correct weight for calibration.

Performing the Calibration

Step-by-step guide to calibrate the balance sensitivity.

Unit Management

Registering, Cancelling, and Changing Units

Managing available measurement units.

% Setting

Configuring for Percentage Calculations

Steps to set reference sample for % mode.

PCS (No. of pieces) Setting

Configuring for Piece Counting

Steps to set the balance for counting items.

Performance Checks

Repeatability Test Procedure

Method to check measurement consistency over multiple readings.

Maintenance

Eccentric Error Check and Cleaning

Procedures for checking off-center load errors and general balance care.

Troubleshooting

Common Issues and Solutions

Guide to diagnosing and resolving balance operational problems.

Specifications

Balance Model Technical Details

Comprehensive list of technical specifications for each model.

Parts List

Available Parts and Accessories

List of optional and maintenance parts with part numbers.

Peripheral Devices

EP-60A Electronic Printer Connection and Functions

How to connect and operate the EP-60A printer.

RS-232C Interface

Details for connecting the balance to a PC via RS-232C.

Input/Output Format

Specifies how data is sent and received from the balance.

Command Code Reference

List of commands for controlling the balance from a PC.

Unit Conversion Details

Conversion Coefficients and Usage

Explains unit conversion factors and minimum display values.