Need help?Do you have a question about the Shimadzu ATY224R and is the answer not in the manual?
General| Capacity | 220 g |
|---|---|
| Readability | 0.1 mg |
| Interface | RS-232C |
| Power Supply | AC Adapter |
| Operating Temperature | 5°C to 40°C |
| Repeatability | 0.1 mg |
| Linearity | ±0.2 mg |
| Response Time | Approx. 3 seconds |
| Calibration | Internal Calibration |
| Display | LCD |
| Weighing Units | g, mg, oz, ct, dwt |
Identifies and explains the parts of the ATX-R/ATY-R Series balances.
Details the process of setting up the balance from installation to initial measurement.
Explains how to perform span calibration for the balance after moving or temperature changes.
Guides on how to enter the weighing mode and perform basic weighing operations.
Discusses general procedures and considerations before performing calibration.
Explains how to adjust balance sensitivity using internal or external weights.
Describes the automated span calibration function triggered by temperature changes.
Details how to recalibrate the built-in internal weight of the balance.
Explains how to set unit weight and count pieces.
Covers weighing samples as a percentage of a reference weight.
Details how to measure the density of solid samples.
Lists common symptoms, probable causes, and countermeasures for balance issues.
Explains common error messages and their solutions.
To Next Page
