BEFORE
WEIGHING
USING THE
BALANCE
USING MORE CONVENIENTLY MAINTENANCE
TROUBLESHOOTING
FOR YOUR
INFORMATION
143
V
Continued on next page
On turning the GLP output function ON, you can add the balance ID and other information to the
calibration record (^ page 61) and weight reading outputs. However, the statistic calculation function
of the printer cannot be used.
Example printout from printer
(When the GLP output function is set to ON)
SHIMADZU CORP.
D
*********
200.0000
g
ATX224R
Balance model name
Weight reading
The person who carried out
measurement signs here.
Name of manufacturer
Balance ID
Balance serial number
Setting the GLP Output Function
1
Press for about 3 seconds.
This opens the calibration menu.
2
Select the GLP output function.
[GLP.OUT]
Stability Mark GLP Output Function
Lit
ON
Unlit
OFF
!G!L!P.O!U!T
Check the presence or absence
of the stability mark.
GLP Output
Function
To Next Page
Loading...
Need help?
General
