44
3
MENU SETTINGS
1
Open the target menu from the weighing mode.
The method used to open a menu option differs depending on the group.
For details on the methods used for menu opening from each group, see "The Structure of the
Menu" (^ page 42).
*
For a menu option that is already set…
(the stability mark) appears in the menu display.
2
Conrm and return to the weighing mode.
The operation after conrming the menu selection differs depending on the menu, and you will
either be returned to the weighing mode automatically or will need to do it manually.
To return to the weighing mode manually, press a number of times or press
for about 3 seconds.
*
If you open the menu again…
The recently set menu option will be displayed rst.
Note also that, when the set menu option is displayed, (the stability mark) also appears.
Basic Menu
Operations
To Next Page
Loading...
Need help?
General
