Except for chain rings and chains, which
are consumable items, the system is
fundamentally maintenance-free. The
gears inside the drive unit (the core of an
e-bike) have been designed to provide
the total durability required and boast a
high level of quality which extends their
usefulness.
LOW-MAINTENANCE
The difficulties that occur within drive
unit, cycle computer, and other
components are unique to e-bikes and
diagnosed using knowledge of
traditional bicycles. However, using the
“E-TUBE PROJECT” enables you to check
system status and diagnose faults with
ease.
SIMPLE OPERATION
The ability to provide e-bike components
as well as other bicycle parts via the same
production system is a strength unique to
SHIMANO. You can purchase products or
service parts by contacting SHIMANO
distributor.
BETTER SERVICEABILITY
DEALER SUPPORT
The quality and serviceability of SHIMANO STEPS is a blessing not only for riders, but for dealers as well. Electronic parts of e-bikes may be an unknown field for dealers. For this reason, SHIMANO will provide training and dealer
support and hands on training at retail trade shows by our Shimano Technical Representatives to gain full understanding of
SHIMANO STEPS.
PROVIDING QUICK AND ACCURATE
SUPPORT FOR CUSTOMER NEEDS.
DEALER TRAINING PROGRAM
•
General and technical information related to SHIMANO STEPS
•
Hands on experience with E-TUBE PROJECT
•
Servicing and warranty procedures
•
Riding/testing a lot of bicycle models fitted with SHIMANO STEPS
E8000 CONCEPT E8000 MANUAL E6000 CONCEPT E6000 MANUAL
E8000 Series / SYSTEM MECHANISM
https://shimano-steps.com/mtb
22 23
https://shimano-steps.com/mtb
To Next Page
Loading...
