EasyManua.ls Logo

Shimano Steps DU-E6002 - Method of Use; Battery Charging Process

Shimano Steps DU-E6002
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
No rider ever wants to run out of power, so a large-capacity battery is a must.
The E8000 Series battery has a low-profile and attractively-styled design which
allows it to be mounted safely out of the way on the downtube, and it is
waterproof and robust to protect against the impacts and vibrations of energetic
riding.
RIDING DISTANCE (INCLUDING CLIMBING)
BATTERY /
BATTERY MOUNT
MTB DEDICATED DESIGN
» Low profile
» Impact and vibration resistant
» Water proof
C APACIT Y: 504Wh (36V, 14Ah)
» Long riding range
BATTERY WEIGHT
BT-E8010 : 2.65kg
BT-E8020 : 2.9kg
DURABLE BATTERY
Consistent recharge
» More than 60% after charge 1000 times
COMPATIBLE WITH E6000 SERIES
» Longer riding distance (100km) on normal mode
with DU-E6001/ E6002 /E6010/E6012
» Keep compatibility with current EC-E6000
and current frame mount
BATTERY LIFE: *10 00 cycles * After 1,000 c ycles full
 
charging still more than
 
300Wh=60%(Reference)
The down tube-type battery is supplied as a set together with
the battery mount, and can be used with the DU-E8000 and the
DU-E6001/E6002/E6010/E6012. In addition, the battery mount
dimensions on the frame and the charger (EC-E6000) are the
same as before.
BT-E8010
Battery
for Down Tube
BM-E8010
Battery Mount
for Down Tube
BT-E8020
Battery for Down Tube
BM-E8020
Battery Mount
for Down Tube
BM-E8010
BM-E8020
DU-E6001
DU-E6002
DU-E6010
DU-E6012
DU-E8000
BT-E8010
BT-E8020
External Type
Integrated Type
0 80604020 120
km
100
Boost: 50 km (400hm*)
Trail: 75 km (600hm*)
Eco: 100 km (800hm*)
Data only represents an indication for the actual riding distance. The
actual range can vary depending on usage and rider profile, riding
conditions and battery life.
The E8000 series battery has greater capacity than the
E6000 series downtube battery. If the need arises, however,
the series can be also fitted with the BT-E6010 battery.
INTERCHANGEABLE WITH E6000 SERIES
The E8000 Series battery is 504 Wh. Riders can venture
further and be confident of not running out of power in a
remote place. There will always be enough energy for DI2
shifting actions in case the battery runs out of power.
HIGH CAPACITY
All rechargeable batteries gradually store less power with
each recharge. However, after 1,000 charge cycles, this
superbly long-lasting battery unit is specified to still hold
300 Wh, which is 60% of its capacity when new.
SUPERB CHARGE HOLDING
Based on company’s new test results:
- Combined weight (rider + bicycle): 100kg
- Battery: 504Wh
* height meters: climbing distance (positive altitude)
(Refer annex-1 for detail on page 108)
Sudden changes of terrain, which induce abrupt changes in power transfer, put
lots of mechanical stress on rotating parts. Along with such changes, tyre impact
during trail riding can also unseat the chain. As usual, SHIMANO provides tough,
dependable solutions.
DYNAMIC CHAIN ENGAGEMENT
RIGID SPLINED CRANK CONNECTION
WITH STRONG 24 MM BB AXLE
SPLINES
CRANKSET
CHAINRING / CHAINDEVICE
FC-E8050
Crankset
FC-E8000
Crankset
SM-CDE80
Chain Device
SM-CRE80-B
Chainring for Chain Line 53mm
SM-CRE80
Chainring for Chain Line 50mm
 
E-MTB DEDICATED CRANK SET
» Crank options
Hollow crank arm (FC-E8050)
• Solid crank arm (FC-E8000)
» HOLLOW TECH ll type BB axle
Lightweight and rigidity
» 2 options on the grade of price
» Compatible with chain line 50 and 53mm
CRANK ARM LENGTH: 170, 175mm
E-MTB DEDICATED CHAINRING
» w/o Chain Guide only
» 34T, 38T option for 10s and 11s
» DYNAMIC CHAIN ENGAGEMENT
+
with teeth shape to prevent chain drop
CHAIN MANAGEMENT
» Chainring
Same profile as SM-CRM81 (DEORE XT )
CHAIN MANAGEMENT
» Chain device
Drive unit direct mount type (53mm chain line)
Frame mount type (50mm / 53mm chain line)
For single-wheel MTB drive systems, Shimano has optimized
the tooth design. Virtually eliminating chain drop in normal
riding, broader teeth and a special hooked profile provide
150% more chain retention force.
The drive area has suitably intrepid eMTB styling and allows a
chain line of either 50 mm or 53 mm. The FC-E8050 option
provides the high-strength, lightweight rigidity of Hollowtech
cranks.
(with plate) (without plate)
E8000 CONCEPT E8000 MANUAL E6000 CONCEPT E6000 MANUAL
E8000 Series / SYSTEM MECHANISM
https://shimano-steps.com/mtb
20 21
https://shimano-steps.com/mtb

Other manuals for Shimano Steps DU-E6002

Related product manuals