50
Maintenance
Gear shifting adjustment with the electronic gear shifting unit [Adjust]
Gear shifting adjustment with the electronic
gear shifting unit [Adjust]
Gear shifting adjustment for the electronic shifting unit is performed from the cycle computer.
Screens of the SC-E7000, SC-E6100, and SC-E5000 are used here as an example. The same screens
and operations apply for other cycle computers.
CAUTION
• Refer to the dealer's manual of the shifting unit first to confirm whether adjustment is
required before adjusting. Under normal conditions, performing unnecessary
adjustment may worsen gear shifting performance. Improper adjustment may cause
gear engagement skipping, resulting in an accidental fall.
NOTICE
• Mount the bicycle to a maintenance stand or otherwise secure it in place so that the
rear wheel can be spun freely.
TECH TIPS
• The adjustment range varies for rear derailleur (-16 to +16) and internal geared hub
(motor unit) (-4 to +4). This section uses screens from a rear derailleur model for
explanation.
Notation method for operations
Subsequent operations using the main body button of the cycle computer and switch unit are
indicated using the following notation. Refer to each user's manual for information on the
main body button of the cycle computer and switches of the switch unit.
Notation Operation
<F> Indicates an operation for pressing the function button.
<↑>
Indicates an operation for pressing the switch-X of the
assist switch or switch unit integrated type cycle computer.
<↓>
Indicates an operation for pressing the switch-Y of the
assist switch or switch unit integrated type cycle computer.
<▲>
Indicates an operation for pressing the switch-X of the
shifting switch.
<▼>
Indicates an operation for pressing the switch-Y of the
shifting switch.
To Next Page
Loading...
Need help?
General
