Cycle Computer Display and Setting
Changing the settings
47
Clear settings (Clear)
Clear the traveling distance. Or return the display setting to default.
1
Assist Shift
Press the Assist-Y or Assist-Z button to
move the cursor to the item you want to
configure.
Item Details
Exit
Return to the Setting menu
screen
DST Clearing the traveling distance
Default
Reset the SC display setting to
default
Default value set in the SC display setting
Item Default value
Backlight ON
Beep ON
Unit km
Language English
2
Assist Shift
Pressing the Assist-X button enables the
set value at the cursor position and takes
you back to the "Setting menu" screen.
When the traveling distance is cleared, TIME,
AVG, and MAX are also cleared.
To Next Page
Loading...
