Need help?Do you have a question about the Shimano Steps E5003 and is the answer not in the manual?
General| Power Output | 250W |
|---|---|
| Torque | 40 Nm |
| Max Assist Speed | 25 km/h |
| Series | SHIMANO STEPS E5000 Series |
| Chain guard mount | Yes |
| Motor Type | Brushless motor |
| Compatible chain | HG 9-speed |
| Chain line (mm) | 50 mm |
| Gear change support | Yes |
| Compatible chain case | Yes |
Covers DANGER, WARNING, CAUTION levels, riding advice, and disposal regulations for safe use.
Essential checks for drive train, component security, noises, and battery charge before riding.
Details the organization of the SHIMANO STEPS user manuals and related documents.
Identifies cycle computer and switch unit parts and their functions.
Explains the notation used for button operations in the manual.
Instructions for turning the power ON/OFF and the auto power-off function.
Explains the main screen layout, battery level, and other indicators.
Steps to turn the connected bicycle light on and off using the cycle computer.
How to switch between different data displays like gear position, range, and distance.
Information on changing display units between kilometers and miles via E-TUBE PROJECT.
Procedure to reset the accumulated traveling distance (DST) on the cycle computer.
How to activate and use the walk assist function for pushing the bicycle.
Using E-TUBE PROJECT software to update firmware and configure system settings.
Overview of settings adjustable via E-TUBE PROJECT, such as switch functions and display units.
Guidance on resolving issues related to abnormal electronic gear shifting.
How to identify and address error codes displayed on the cycle computer screen.
Understanding and resolving temporary problem indications shown by warning codes.
Lists common symptoms, their possible causes, and remedies for troubleshooting.
To Next Page