8
Viewing the screen
The items displayed on the main screen differ according to the assist bicycle.
Main screen
(A)
(D)
(C)
(E)
(B)
(G)
(F)
(H)
(A)
Battery level indicator
(Refer to “Battery level indicator”)
(E)
ADJUST mode display
(Refer to “NOTICE” below)
(B)
Current speed
Displays the current speed. (Refer to “Display
units”)
(F)
Assist gauge
Displays the current assist mode. A mode that
provides stronger assistance the longer the
length of the displayed gauge.
(C)
Auto gear shifting display
Displayed for the auto gear shifting.
(G)
Walk assist*1
This icon is displayed when switched to walk
assist mode.
(D)
Traveling data display
(Refer to “Switching the traveling data display”)
(H)
Maintenance alert
Indicates that maintenance is required. Contact
your place of purchase or a distributor if this
icon is displayed.
*1 Depending on the region of use, you may not be able to use it due to the laws of the region. Refer to “Making walking
and pushing the bicycle easy (walk assist)” for details on walk assist mode.
NOTICE
If you are unable to change gears using the electronic gear shifting, check the cycle computer display for the following.
•
If [ADJUST] is displayed on the screen, press <A> on the cycle computer to return to the main screen.
•
If the walk assist icon is displayed on the screen, press <X> on the cycle computer to disengage walk assist mode.
•
Refer to “Error/warning indication” also.
Example of ADJUST mode screen Example of walk assist icon display
To Next Page
Loading...
