13
Making walking and pushing the bicycle easy (walk assist)
Depending on the region of use, you may not be able to use it due to the laws of the region. In this case, the operations
described here are disabled.
1.
Stop and switch to walk assist mode.
Hold down button-Y until it reaches the following state.
Walk assist icon
• If nothing is done for one minute after switching to walk assist mode, it will switch back to the assist mode that was selected before
switching.
2.
Push the bicycle carefully while pressing the same button again.
If you let go of button-Y, the assist stops.
X
Y
To Next Page
Loading...
