16
Error/warning indication
Error indication
If an error code “E***” (where *** is letters or numbers) is displayed on the entire screen, the product may have
malfunctioned.
Refer to the “SHIMANO STEPS special battery and parts user's manual” and follow one of the procedures below to reset
the display.
•
Press the battery power button to turn the power OFF.
•
Remove the battery from the battery mount.
NOTICE
• If the situation does not improve even after turning the power back ON, consult with the place of purchase or a distributor as soon as
possible.
Warning indication
If a warning code “W***” (where *** is letters or numbers) is displayed on the screen, the product may have a
temporary problem.
If the situation is improved, this indication will disappear. If the situation does not improve, contact the place of
purchase as soon as possible.
• The PC version of E-TUBE PROJECT (V4 or later) classifies errors and warnings into more detailed categories according to the cause. For this
reason, the error and warning codes that are displayed in the PC version of E-TUBE PROJECT may differ from those displayed on this
product, E-TUBE RIDE, or smartphone version of E-TUBE PROJECT.
For details on error/warning codes, check the latest versions below:
https://si.shimano.com/iER/STP0A
To Next Page
Loading...
