15
External connections
This product has a function for communicating with a PC. For the connection method, contact your place of purchase.
E-TUBE PROJECT
E-TUBE PROJECT is needed to change the setting of the SHIMANO STEPS and to update firmware.
Download E-TUBE PROJECT from our support website (https://bike.shimano.com/e-tube/project.html).
For information on how to install E-TUBE PROJECT, check the support website.
NOTICE
Do not connect to a device while the battery is being charged.
• Firmware is subject to change without notice.
Items configurable in E-TUBE PROJECT
The items that can be set differ according to the assist bicycle. Refer to the user's manual for E-TUBE PROJECT for details.
•
You can change the functions assigned to each operation switch in [Switch setting].
•
You can change the display units for speeds and distances in [Display units].
•
You can set/change the gear when starting from a stop in [Start mode]. (Internal electronic gear shifting only)
•
You can select to have the backlight of the display always ON, always OFF, or linked to the light in [Backlight setting].
Troubleshooting
Gear shifting adjustment with the electronic gear shifting unit [ADJUST]
If gear shifting feels abnormal, contact the place of purchase.
To Next Page
Loading...
