Shimano Steps SM-BCE60 - Page 54

Connection and communication with the PC
Connecting to the PC
54
Connecting to the bicycle
< When the cycle computer has an available port >
1
Connect SM-PCE1 to an available port of the cycle computer.
(A) Assist switch
(B) Drive Unit
(A)
(B)
< When the cycle computer has no available port >
1
First, connect SM-JC40/JC41 to SM-PCE1.
Then, disconnect EW-SD50 from the center port of the cycle computer and connect it to
SM-JC40/JC41.
(A) Assist switch
(B) Drive Unit
(A)
(A)
(B)
2
Connect EW-SD50 to the available port of SM-JC40/JC41 and the center port of the cycle
computer.