Shimano BL-T6000 - Adding Mineral Oil and Bleeding Air (General); BR-M8000 Caliper Air Bleeding Procedure

18
To be continued on next page
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
MAINTENANCE

Adding Shimano genuine mineral oil and bleeding air
With the spacer for bleeding (yellow) still attached to the calipers, place the bicycle into a bicycle
stand, or the like, as shown in the illustration.
(A) Hose
(B) Caliper
NOTE
When bleeding the air out of the caliper, you
will need the SM-DISC (oil funnel and oil
stopper).
(B)
(A)
BR-M8000
1
(z)
Set the brake lever so that it is in riding
position at 45° angle from the ground.
(z) 45°