Need help?Do you have a question about the Shimano BL-T6000 and is the answer not in the manual?
General| Model | BL-T6000 |
|---|---|
| Type | Hydraulic Disc Brake Lever |
| Brake Lever Actuation | Hydraulic |
| Material | Aluminum |
| Reach Adjust | Yes |
| Clamp Diameter | 22.2mm |
| Intended Use | Mountain Biking |
| Adjustability | Reach Adjust |
| Compatibility | Shimano Hydraulic Disc Brakes |
Covers safety during installation and general operation, including part usage and hand protection.
Safety advice on bicycle orientation, lever feel, fluid leaks, and brake system checks before riding.
Procedure for bleeding air from the BR-M8000 caliper using mineral oil and a bleed spacer.
Steps for bleeding air using an oil funnel and syringe connected to the bleed nipple.
Techniques for collecting bled oil and air bubbles using a bag and ensuring proper lever operation.
Maintaining oil level in the funnel and correctly tightening the bleed nipple after bleeding.
Steps to mount the bleed spacer and prepare the BR-M6000 caliper for mineral oil bleeding.
Using a syringe to inject oil into the BR-M6000 caliper and remove air bubbles.
Connecting tube and bag to the BR-M6000 bleed boss to collect oil and air bubbles.
Closing the bleed boss and checking lever operation for air release in the BR-M6000 caliper.
To Next Page
