30
Start mode (Start mode setting)
Sets the start gear when using start mode function.
1.
Press the Assist-Y or Assist-Z to move the cursor to the
item you want to configure.
Configurable items Details
OFF No setting
2 2-speed
3 3-speed
4 4-speed
5 5-speed
Assist Shift
< SC-E6000 > < SC-E6010 >
2.
Pressing the Assist-X button enables the set value at
the cursor position and takes you back to the "Setting
menu" screen.
Assist Shift
Backlight (Backlight setting)
Configure the backlight setting.
1.
Press the Assist-Y or Assist-Z to move the cursor to the
item you want to configure.
Configurable items Details
ON Always turned on
OFF Always turned off
MANUAL
Turns on and off in
conjunction with the
battery-powered light
Assist Shift
< SC-E6000 > < SC-E6010 >
2.
Pressing the Assist-X button enables the setting item
indicated by the cursor and takes you back to the
"Setting menu" screen.
Assist Shift
To Next Page
Loading...
