To Next PageTo Next Page
Need help?Do you have a question about the Shindaiwa C350 and is the answer not in the manual?
Describes symbols like WARNING, CAUTION, IMPORTANT, and NOTE used in the manual.
Covers safe operation practices, maintaining alertness, and preventing fires.
Ensures all parts are secure and functional, verifying shield and attachment integrity.
Details required personal protective equipment and correct posture for safe operation.
Advises on hazards from surroundings, weather conditions, and flying debris.
Locates and explains crucial safety decals found on the equipment for user awareness.
Identifies key parts for both T350 Grass Trimmer and C350 Brushcutter models.
Lists performance metrics, weights, capacities, and engine details for the models.
Connects the main engine powerhead to the driveshaft and outer tube.
Attaches the T350 model's handle and barrier bar to the outer tube.
Connects the handlebar and throttle controls for the C350 model.
Secures the vital protective shield for cutting attachments to the unit.
Guides the attachment of the trimmer head to the gearcase shaft.
Guides the attachment of the brushcutter blade to the gearcase shaft.
Sets proper free play for responsive throttle control and safe operation.
Covers correct fuel-oil ratios and safe refueling practices.
Provides a step-by-step guide for safely igniting the engine.
Details the procedures for safely shutting down the engine.
Sets the minimum engine speed for safe operation when throttle is released.
Explains proper use of shoulder straps and harnesses for control and comfort.
Safe operation methods and techniques for grass trimming.
Safe operation methods and techniques for brushcutting.
Outlines essential routine checks, cleaning, and fastener tightening.
Details tasks required at 10, 15, and 50-hour intervals for upkeep.
Covers cleaning the spark arrester screen and inspecting the muffler.
Prepares the unit for extended periods of non-use, including fuel draining.
Instructions for maintaining cutting edge sharpness and blade balance.
Addresses common causes and remedies for engine starting failures.
Diagnoses and fixes issues causing reduced engine performance.
Covers other issues like poor acceleration, abrupt stopping, or excessive vibration.
Details the limited warranty for emission control systems and covered parts.
Outlines user duties for performing maintenance and preventing warranty voidance.
Guides on how to get authorized repairs and locate service centers.
Describes symbols like WARNING, CAUTION, IMPORTANT, and NOTE used in the manual.
Covers safe operation practices, maintaining alertness, and preventing fires.
Ensures all parts are secure and functional, verifying shield and attachment integrity.
Details required personal protective equipment and correct posture for safe operation.
Advises on hazards from surroundings, weather conditions, and flying debris.
Locates and explains crucial safety decals found on the equipment for user awareness.
Identifies key parts for both T350 Grass Trimmer and C350 Brushcutter models.
Lists performance metrics, weights, capacities, and engine details for the models.
Connects the main engine powerhead to the driveshaft and outer tube.
Attaches the T350 model's handle and barrier bar to the outer tube.
Connects the handlebar and throttle controls for the C350 model.
Secures the vital protective shield for cutting attachments to the unit.
Guides the attachment of the trimmer head to the gearcase shaft.
Guides the attachment of the brushcutter blade to the gearcase shaft.
Sets proper free play for responsive throttle control and safe operation.
Covers correct fuel-oil ratios and safe refueling practices.
Provides a step-by-step guide for safely igniting the engine.
Details the procedures for safely shutting down the engine.
Sets the minimum engine speed for safe operation when throttle is released.
Explains proper use of shoulder straps and harnesses for control and comfort.
Safe operation methods and techniques for grass trimming.
Safe operation methods and techniques for brushcutting.
Outlines essential routine checks, cleaning, and fastener tightening.
Details tasks required at 10, 15, and 50-hour intervals for upkeep.
Covers cleaning the spark arrester screen and inspecting the muffler.
Prepares the unit for extended periods of non-use, including fuel draining.
Instructions for maintaining cutting edge sharpness and blade balance.
Addresses common causes and remedies for engine starting failures.
Diagnoses and fixes issues causing reduced engine performance.
Covers other issues like poor acceleration, abrupt stopping, or excessive vibration.
Details the limited warranty for emission control systems and covered parts.
Outlines user duties for performing maintenance and preventing warranty voidance.
Guides on how to get authorized repairs and locate service centers.
General| Engine Displacement | 33.6 cc |
|---|---|
| Fuel Type | Gasoline |
| Engine Type | 2-stroke |
| Shaft Type | Straight |
| Starter System | Recoil |
| Fuel Tank Capacity | 0.81 L |
